Danobat - 2012 - T3CH126+CPI105DI - Drilling and Sawing Street

Applicable material: Metal
Current bid: EUR 7500

Infeed table 24000 mm. <br>
Discharge table 18000 mm. <br>
<br>
Multispindle drilling rig T3CH-126:<br>
Maximum material size 1200 x 600 mm. <br>
Minimum Material Dimension 80 x 6 mm. <br>
Drilling, tapping, sovereigning, centering and marking. <br>
Servo controlled motor speed and feed speeds. <br>
3 changers for 6 tools for 3-sided machining. <br>
Automatic calibration system by means of laser measurement, after tool change. <br>
Clamping pressure control horizontal clamping max. 1 x 2.5 tons. <br>
Clamping pressure control vertical clamping max. 4 x 1.5 tons. <br>
<br>
Double column mitre band saw machine CPI-105DI:<br>
<br>
Capacity 90 degrees 1000 x 500 mm. or around 520 mm. <br>
45 degrees 660 x 500 mm. <br>
30 degrees 450 x 500 mm. <br>
frequency controlled variable belt speed 20-157 m/min. <br>
Hydraulic feeding and clamping. <br>
driven chip brush. <br>
Horizontal and Vertical clamping. <br>
Trailing saw band guide arm with the clamp. <br>
Bandsaw size 7545 x 54 x 1.6 mm. <br>
Automatic hydraulic tire tensioning device. <br>
<br>
Marking system Danomarking UM03 on T3CH-126:<br>
Powered marking system by means of marking tools. <br>
Danomarking installed for 4-sided machining for marking and scribing. <br>
Vertical Danomarking system placed on the Vertical drilling unit. <br>
2 Horizontal Danomarking systems on the Horizontal drilling units. <br>
Lower Danoma ring with control mounted underside. <br>
<br>
Operating System:<br>
<br>
DANOCONTROL expanded. <br>
PC control with FAGOR axis control. <br>
Interface with DSTV protocol data entry capability. <br>
Real-time edits can be followed on graphic screen. <br>
standard link with Lantek 3D Flex software. <br>