FortiMax Finish 60 DTM Sneldrogende 1K Coating

  • FortiMax Finish 60 DTM Sneldrogende 1K Coating
  • Category: Other metalworking
  • Weight: 5 kg
  • Condition: New
Price on request

Quick-drying semi-gloss anti-corrosion one-component high build alkyd resin DTM coating.

Characteristics:

Gloss: Semi-gloss (semi-gloss)
Color: Standard colors (eg RAL, NCS), lead-free
Solid content: Approx. 50 volume%
Fox content: ≤ 450 gr / ltr.
Density: At 20 ° C ± 1.24 kg / ltr.
Dry film thickness: Standard: 80-100 μm (depending on
application method)
Theoretical yield: With a dry film thickness of 80 μm, 6.25 m2 / l.

Drying:

Dust dry after 30 minutes. Tack free after 1 hour. Recoatable after 30 minutes with Fortimax products, otherwise after 12 hours. With a higher dry layer thickness, longer drying times must be observed.

Packing:

5 and 20 liter cans.
Thinner in 5 and 25 liter cans.

Shelf life:

In the original, well-sealed packaging 12 months, if stored at a temperature between 5 ° C and 40 ° C.

Application:

As a corrosion-resistant finish in color on blasted steel. As a single layer finish suitable for the finishing of steel constructions which function in a dry environment. The product gives good protection of the substrate during the construction period if there is sufficient layer thickness. Can also be used as a single-layer coating on steel containers and the like. When higher demands are made on rust resistance and durability of the paint system, the use of a rust-resistant alkyd resin primer is recommended. Suitable for the protection of steel constructions in a rural to slightly industrial environment.

Dilution:

The paint can be applied undiluted with airless, airmix spray equipment, brush and roller. Under certain conditions a small amount of diluent N27 can be added to obtain the correct viscosity.

Application conditions:

The temperature of the substrate must be at least 3 ° C above the dew point. Good ventilation must be provided during application and drying to remove solvent vapors. This is necessary to achieve good drying and important for the health of the processors.

Application method:

Brush, roller, air spray, airless and airmix spray. Stir the paint mechanically before use to obtain a homogeneous product.

BARINI offers a complete, competitively priced range of industrial lacquers and non-paints with a mountain of knowledge and specialization. Our assortment consists of:

- Products for cleaning machines
- Products for roughing the body parts
- Products, industrial paint for spraying the body parts
- Lettering, new brand / type and safety stickers

Do you need durable protection for a steel construction or industrial application? Contact us for the possibilities!

Barini V.O.F.
Sluisweg 3, 4794 SW Heijningen
0167 500 850
info@barini.nl

Category Other metalworking
Brand FortiMax Finish 60 DTM
Model Sneldrogende 1K Coating
Weight 5 kg
General condition New

Similar ads